1.4313 DIN X4crni134 AISI Ca6-Nm S41500 Stainless Steel Coil Plate Bar Pipe Fitting Flange Square Tube Round Bar Hollow Section Rod Bar Wire Sheet
Product Description
Production Description:
1. Steel Grade: 1.4313 DIN X4CrNi134 AISI CA6-NM S41500
2. Product name: 1.4313 DIN X4CrNi134 AISI CA6-NM S41500 stainless steel coil
width: 1000-3000mm
Length: 1000-12000mm
4.Heat Treatment: as required
5.Standard: ASTM,GB,JIS,DIN,BS
Steel 1.4313 (Mat.No. 1.4313, DIN X4CrNi134, AISI CA6-NM)
Designation by Standards
Chemical Composition (in weight %)
Description
Steel 1.4313 has a good strength and toughness properties in combination with good corrosion resistance and realiable weldability.
Applications
Steel is used for parts subjected to high mechanical stress in fittings and pump construction, for compressors and turbine in hydroelectric power station,and in crude oil and refrigerating systems.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103x N/mm2]: 200, 185 (200oC), 170 (400oC)
Density [g/cm3]: 7.7
Thermal conductivity [W/m.K]: 25.0
Electric resistivity [Ohm mm2/m]: 0.6
Specific heat capacity[J/g.K]: 0.43
Magnetisable: Yes
Coefficient of Linear Thermal Expansion 10-6oC-1
Soft Annealing
Heat to 600-650oC, cool slowly in furnace.
Hardening
Harden from a temperature of 950-1050oC followed by oil or air quenching.
Tempering
Tempering temperature:
QT 650: 650-700oC + 600-620oC
QT 780: 550-600oC
QT 900: 520-580oC
Structure after tempering is martensit with small ferrite component.
Mechanical properties at at ambient temperature
Condition: Annealed
Hardness: 320 HB
Tensile strength: max. 1100 N/mm2
For QT 650
0.2% Proof Stress: 520 N/mm2
Tensile strength: 650-820 N/mm2
Elongation (A5): 15% (Longit., d Contact us if you need more details on 1.4313. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DIN X4crni134、AISI Ca6-Nm. If these products fail to match your need, please contact us and we would like to provide relevant information.
1. Steel Grade: 1.4313 DIN X4CrNi134 AISI CA6-NM S41500
2. Product name: 1.4313 DIN X4CrNi134 AISI CA6-NM S41500 stainless steel coil
width: 1000-3000mm
Length: 1000-12000mm
4.Heat Treatment: as required
5.Standard: ASTM,GB,JIS,DIN,BS
Steel 1.4313 (Mat.No. 1.4313, DIN X4CrNi134, AISI CA6-NM)
Designation by Standards
Brand Name | Ravne No. | Mat. No. | DIN | EN | AISI |
1.4313 | 340 | 1.4313 | X4CrNi134 | X3CrNiMo13-4 | CA6-NM |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
max. 0.05 | max. 0.60 | max. 1.00 | 13.25 | 0.55 | 4.00 | - | - | - |
Description
Steel 1.4313 has a good strength and toughness properties in combination with good corrosion resistance and realiable weldability.
Applications
Steel is used for parts subjected to high mechanical stress in fittings and pump construction, for compressors and turbine in hydroelectric power station,and in crude oil and refrigerating systems.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103x N/mm2]: 200, 185 (200oC), 170 (400oC)
Density [g/cm3]: 7.7
Thermal conductivity [W/m.K]: 25.0
Electric resistivity [Ohm mm2/m]: 0.6
Specific heat capacity[J/g.K]: 0.43
Magnetisable: Yes
Coefficient of Linear Thermal Expansion 10-6oC-1
20-100oC | 20-200oC | 20-300oC |
10.5 | 10.9 | 11.6 |
Soft Annealing
Heat to 600-650oC, cool slowly in furnace.
Hardening
Harden from a temperature of 950-1050oC followed by oil or air quenching.
Tempering
Tempering temperature:
QT 650: 650-700oC + 600-620oC
QT 780: 550-600oC
QT 900: 520-580oC
Structure after tempering is martensit with small ferrite component.
Mechanical properties at at ambient temperature
Condition: Annealed
Hardness: 320 HB
Tensile strength: max. 1100 N/mm2
For QT 650
0.2% Proof Stress: 520 N/mm2
Tensile strength: 650-820 N/mm2
Elongation (A5): 15% (Longit., d Contact us if you need more details on 1.4313. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DIN X4crni134、AISI Ca6-Nm. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Alloy and carbon steel > steel sheet
Premium Related Products
Other Products
Hot Products
K3530 Series Bielomatik Ultrasonic Plastic WelderApsonic Ultrasonic Generator Cobra (20KHz)2017 outstanding Hot Plate Plastic Welding MachineSolar panel Ultrasonic welding machineUltrasonic Cutting Machine for Fiber or PE etc Organic PlasticsUltrasonic Liquid Sonochemistry Processor For emulsifier extraction disruption Used in factory20KHZ Wholesale ODM Available Auto Parts Ultrasonic Horn(Mould)Ultrasonic Plastic Tube Sealing Machine GeneratorHand Ultrasonic Plastic Cutting Machine 30KHz Ultrasonic Cutter4200w Ultrasonic Automatic Disposable Medical Face Mask Making Machine2000w Automatic Cost-effective Ultrasonic Wire Welding Machine for lithium batteryCE Approved BDS Automatic Ultrasonic Woven Label Slitting MachineBDS supply replacement high powe ultrasound welding ultrasonic welder / booster / converter for plastic weldingBDS Suply Price High Frequency Industrial Using 15K Ultrasonic Plastic Welding Machine for PVC,PE,PP ,Non woven fabric with CEBDS handheld Ultrasonic camembert food / fabic cutting machine cutter knifeBDS dongguan ultrasonic machine precision Automatic high frequency plastic welder/ welding machines