N06600 Nickel-Chromium Alloy Pipe
Product Description
Element | Content |
Nickel (Ni) | 72 % min |
Chromium (Cr) | 14 - 16 % |
Iron (Fe) | 6 - 10 % |
Property | Metric | Imperial |
Density | 8.47 g/cm3 | 0.306 lb/in3 |
Melting point | 1413 °C | 2575°F |
Co-Efficient of Expansion | 13.3 µm/m.°C | 7.4x10-6 in/in.°F |
Modulus of rigidity | 75.6 kN/mm2 | 10965 ksi |
Modulus of elasticity | 206 kN/mm2 | 29878 ksi |
Condition of Supply | Heat Treatment (After Forming) | |||
Annealed/Spring Temper | Stress relive at 460°C (860°F) for 1hr and air cool. | |||
Condition | Approx Tensile Strength | Approx Service Temp. | ||
Annealed | 600-750 N/mm2 | 87-109 ksi | -200 to +330°C | -330 to +625°F |
Spring Temper | 900-1250 N/mm2 | 131-181 ksi | -200 to +330°C | -330 to +625°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
4. Contact usName: Denny ChengDirect line: 021-67897611 Contact us if you need more details on N06600 Alloy Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Round Pipe Tube、Nickel-Chromium Alloy. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Stainless Steel > stainless steel pipe
Premium Related Products