Hastelloy C22 Nickel-Chromium-Molybdenum Alloy
Product Description
Element | Content (%) |
---|---|
Chromium, Cr | 20-22.5 |
Molybdenum, Mo | 12.5-14.5 |
Tungsten, W | 2.5-3.5 |
Cobalt, Co | 2.5 min |
Iron, Fe | 2-6 |
Manganese. Mn | 0.5 max |
Vanadium, V | 0.35 min |
Silicon, Si | 0.08 max |
Phosphorus, P | 0.02 max |
Sulfur, S | 0.02 max |
Carbon, C | 0.015 max |
Nickel, Ni | Remainder |
Properties | Metric | Imperial |
---|---|---|
Density | 8.69 g/cm³ | 0.314 lb/in³ |
Melting point | 1399°C | 2550°F |
Properties | Metric | Imperial |
---|---|---|
Elastic modulus | 206 MPa | 29878 psi |
Properties | Metric | Imperial |
---|---|---|
Thermal conductivity (at 100°C/212°F) | 11.1 W/mK | 6.4 BTU in/hr.ft².°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
4. Contact usName: Denny ChengDirect line: 021-67897611 Contact us if you need more details on Hastelloy C22 Alloy. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Nickel-Chromium-Based Super Alloys、N06022 Alloy. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Stainless Steel > stainless steel pipe
Premium Related Products